Before you spend money on a bigger server, make sure the one you have is set up to perform. Many refurbished servers run slower than they should because of a power-saving BIOS profile, a disabled controller cache, unbalanced memory or out-of-date firmware. These fixes cost nothing and often make a noticeable difference.
Find the bottleneck
| Metric | Healthy sign | Warning sign | Usual fix |
|---|---|---|---|
| CPU usage | Spikes, but not stuck near 100% | Constantly near 100% | Spread workloads, faster or more cores |
| Memory | Free memory available | Heavy paging or swapping | More RAM, or fewer or smaller VMs |
| Disk latency | Low and steady | High latency during normal use | SSDs, better RAID level, controller cache |
| Network | Below link capacity | Link saturated or errors | Faster ports, teaming, fix cabling |
| Temperature | Within normal range | Throttling or high fan speed | Improve cooling and airflow |

Free performance fixes
- BIOS power profile: set the system profile to performance (Dell) or high performance (HPE), or OS-controlled if your hypervisor manages power. Power-saving profiles can slow responsive workloads.
- Balanced memory: populate the same amount of memory on every channel and every CPU. Unbalanced memory reduces bandwidth.
- RAID controller cache: enable write-back cache when the controller has a healthy battery or flash cache.
- Firmware and drivers: update BIOS, controller, NIC and drive firmware, and use vendor drivers.
- Right-size VMs: giving a virtual machine too many vCPUs can make it slower, not faster.
- Clean up: remove unused services, old snapshots and scheduled tasks that clash with working hours.
When to upgrade instead
If measurements show the server is genuinely short of resources after tuning, targeted upgrades are the next step. More RAM and SSDs are usually the best value. Read upgrading a refurbished server for compatibility checks, and see our storage configuration guide for disk layouts.
Frequently asked questions
Why is my server slow?
The most common causes are slow or busy disks, too little memory, a power-saving BIOS profile, scheduled jobs running during the day, or a network bottleneck. Measure each before changing anything.
Does BIOS power profile affect server performance?
Yes. Power-saving profiles reduce CPU clock speeds and can add latency. Performance or OS-controlled profiles are usually better for busy servers.
Will adding RAM speed up my server?
If the server is short of memory and paging to disk, yes, often dramatically. If memory is not the bottleneck, extra RAM will not help much.
How do I check server performance?
Use the operating system’s performance tools, your hypervisor’s graphs, and iDRAC or iLO for hardware health, ideally with monitoring software that records trends.
Need an upgrade? Browse server memory and server SSDs, or ask our team to recommend one.


