Upgrading a Refurbished Server: What You Need to Know

Server Upgrades

One of the best things about refurbished enterprise servers is how upgradeable they are. Adding memory, swapping hard drives for SSDs, fitting a second processor or a faster network card can give an older server years of extra useful life for a fraction of the cost of replacing it. The key is compatibility.

Quick answer: the most cost-effective upgrades are more RAM, SSDs instead of hard drives, and faster network ports. Always match the memory type and population rules for your model, fit drives in the correct caddies, add a second CPU only with a matching processor and heatsink, and check power supply capacity before adding GPUs or many drives.

Upgrades ranked by impact

UpgradeTypical benefitKey compatibility check
More RAMRun more VMs and larger databasesSame DDR generation and type (RDIMM or LRDIMM) and slot population rules
SSDs instead of hard drivesMuch faster boot, VMs and databasesDrive interface, caddy type and RAID controller support
Second processorMore cores and memory channelsIdentical CPU model, matching heatsink and enough PSU capacity
10GbE networkingFaster file transfers and backupsFree PCIe slot or network module option; switch support
Larger capacity drivesMore storage spaceController support for the drive size
GPUAI, video and compute workloadsSupported card, riser, power cables and cooling
server upgrades

Memory by server generation

Server generationMemory type
Dell 12th gen (R620, R720) and HPE Gen8DDR3 (PC3) ECC
Dell 13th gen (R630, R730) and HPE Gen9DDR4 (PC4) ECC
Dell 14th gen (R640, R740) and HPE Gen10DDR4 (PC4) ECC

Browse our DDR4 server memory and DDR3 server memory.

Watch out: do not mix RDIMMs and LRDIMMs in the same server, and follow the slot population order in the server manual. Incorrect population can stop the server booting or reduce memory speed.
Pro tip: with two processors installed, spread memory evenly across both CPUs. Each processor controls its own memory slots, so memory on an empty socket’s slots is not used.

Planning the upgrade

  1. Check current usage in iDRAC, iLO or your OS to find the real bottleneck.
  2. Look up the exact model’s supported parts and limits.
  3. Update BIOS and firmware before fitting new parts.
  4. Back up before changing storage.
  5. Fit parts with the server powered off, unless they are hot-swap drives or power supplies.
  6. Check the server detects the new parts and run diagnostics.
Good to know: Windows Server is licensed per core, so adding a second processor or a higher-core CPU can increase your licence costs. Check licensing before upgrading CPUs.

Not sure whether to upgrade or replace? Our guide to how long servers last and our Dell vs HP generation comparison can help you decide.

Frequently asked questions

Can I add RAM to a refurbished server?

Yes, as long as you use the same memory type and follow the slot population rules for your model.

Can I put SSDs in an older server?

Usually yes, in the correct drive caddies and on a RAID controller that supports them. SATA and SAS SSDs work in most server bays.

Do I need two CPUs to use all the memory slots?

On two-socket servers, yes. Each CPU controls its own memory slots, and some PCIe slots also need the second CPU.

Is it worth upgrading an old server?

Often, if the platform is still supported by your software. RAM and SSD upgrades are inexpensive and can extend a server’s useful life considerably.

Upgrading? Browse server SSDs, server hard drives and server parts, or ask us to check compatibility.

Server Site