How to Set Up a Virtualized Environment on a Refurbished Server

Virtualization

Virtualisation lets one physical server run several virtual machines, each with its own operating system and applications. It is the best way to get full value from a refurbished server: a two-socket server with plenty of RAM can replace several older machines, and virtual machines are far easier to back up, move and restore.

Quick answer: choose a refurbished server with enough cores and RAM for all your virtual machines, enable virtualisation (Intel VT-x and VT-d) in the BIOS, set up RAID on SSDs for VM storage, install a hypervisor such as Proxmox VE, Microsoft Hyper-V or VMware ESXi, then create and back up your virtual machines.

Step 1: Size the server

ResourceRule of thumbWhy it matters
CPU coresAdd up the vCPUs your VMs need; light workloads can share coresMore cores let you run more VMs at once
RAMAdd up RAM for every VM, plus room for the hypervisor and growthRAM is usually the first limit you hit
StorageSSDs in RAID 10 or RAID 1 for VMs; larger drives for bulk dataStorage speed decides how responsive VMs feel
NetworkAt least two ports; 10GbE for storage or busy hostsSeparate management, VM and backup traffic
Pro tip: buy more RAM than you think you need. It is the resource virtual machines run out of first, and adding memory later is easy on a server with free slots. See our server memory.
server virtualization hardware

Step 2: Choose a hypervisor

HypervisorLicensingGood for
Proxmox VEOpen source; optional paid support subscriptionSmall businesses and labs wanting VMs and containers
Microsoft Hyper-VIncluded with Windows ServerWindows-centric businesses
VMware ESXiCommercial; licensing changed after Broadcom acquired VMware, so check current termsBusinesses already standardised on VMware
XCP-ngOpen sourceXen-based environments

Our comparison of KVM, Hyper-V and Xen explains the technical differences.

Watch out: check hardware compatibility before you buy. Newer hypervisor versions sometimes drop support for older processors, RAID controllers or network cards. Confirm your chosen hypervisor supports the server generation and its controllers.

Step 3: Prepare the hardware

  1. Update BIOS, RAID controller, NIC and iDRAC or iLO firmware.
  2. In the BIOS, enable Intel VT-x (Virtualization Technology) and VT-d, or the AMD equivalents.
  3. Set the power profile to performance or OS-controlled, as your hypervisor recommends.
  4. Create the RAID virtual disks for the hypervisor and VM storage.
  5. Plan network ports: management, VM traffic and, ideally, backup or storage.

Step 4: Install and configure

  1. Install the hypervisor to a boot device or a small mirrored volume.
  2. Configure networking, including VLANs if you use them.
  3. Add storage for virtual machines.
  4. Create virtual machines and install guest operating systems with the right drivers or guest tools.
  5. Set up backups of the virtual machines and test a restore.
Good to know: virtual machines are just files, so backing up and restoring a whole server becomes much simpler. With two hosts, you can also restart virtual machines on the second host if the first fails.

Step 5: Keep it healthy

  • Monitor CPU, RAM and storage use, and add resources before they run out.
  • Patch the hypervisor and guests regularly.
  • Avoid running VMs on old snapshots for long periods; delete snapshots after changes are confirmed.
  • Review our server maintenance schedule.

Frequently asked questions

Can a refurbished server run virtualisation?

Yes. Refurbished enterprise servers support hardware virtualisation and run Proxmox VE, Hyper-V and VMware ESXi, subject to the hypervisor’s compatibility list.

How many virtual machines can one server run?

It depends on the server’s cores, RAM and storage and on how demanding each VM is. RAM is usually the limiting factor.

Which hypervisor is free?

Proxmox VE and XCP-ng are open source. Hyper-V comes with Windows Server licences. VMware licensing has changed, so check the current terms.

Do I need RAID for virtualisation?

Strongly recommended. RAID protects all your virtual machines from a single drive failure.

Ready to consolidate? Configure a refurbished virtualisation host with the cores, RAM and SSDs you need, or ask our team.

Server Site